PartsTable
Technical Data Sheet
Download PDF

74A501210-2015 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

74A501210-2015: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, thread_class: 3A A, thread_length: 0.460 INCHES NOMINAL IN, overall_length: 3.767 INCHES NOMINAL IN, first_end_style: COUNTERSUNK, second_end_style: CHAMFERED AND COUNTERSUNK. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-118-3210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74A501210-2015
NSN: 5315-01-118-3210
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
thread_class3A A
thread_length0.460 INCHES NOMINAL IN
overall_length3.767 INCHES NOMINAL IN
first_end_styleCOUNTERSUNK
second_end_styleCHAMFERED AND COUNTERSUNK
style_designatorSHOULDER
thread_directionRIGHT-HAND
first_step_length1.720 INCHES NOMINAL IN
third_step_length0.445 INCHES NOMINAL IN
first_end_locationSHOULDER END
second_step_length1.602 INCHES NOMINAL IN
NSN5315-01-118-3210
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 74A501210-2015 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 0.5013 INCHES MINIMUM AND 0.5016 INCHES MAXIMUM IN
•
FIRST END COUNTERSINK DIAMETER: 0.250 INCHES NOMINAL IN
•
SECOND END COUNTERSINK DIAMETER: 0.125 INCHES NOMINAL IN
•
FIRST END LOCATION: SHOULDER END
•
THIRD STEP DIAMETER: 0.1828 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
•
SECOND END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
THREAD LENGTH: 0.460 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST STEP DIAMETER0.5013 INCHES MINIMUM AND 0.5016 INCHES MAXIMUM IN
FIRST END COUNTERSINK DIAMETER0.250 INCHES NOMINAL IN
SECOND END COUNTERSINK DIAMETER0.125 INCHES NOMINAL IN
FIRST END LOCATIONSHOULDER END
THIRD STEP DIAMETER0.1828 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
SECOND END TAPER ANGLE45.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLEONE END DRILLED
THREAD LENGTH0.460 INCHES NOMINAL IN
FIRST END STYLECOUNTERSUNK
FIRST HOLE DIAMETER0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
74A501210-2011Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 74A501210-2015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74A501210-2015?
74A501210-2015 is a PIN,SHOULDER,HEADLESS.
What parts can replace 74A501210-2015?
There is 1 known substitute for 74A501210-2015: 74A501210-2011. Substitute compatibility should be verified for your specific system.
What is the NSN for 74A501210-2015?
74A501210-2015 is cataloged in the U.S. Government catalog under NSN 5315-01-118-3210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74A501210-2015