PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 74A451006-1001
74A451006-1001 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The SWING JOINT,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 SLEEVE, leg_length: 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM ALL ENDS IN, material_document_and_classification: QQ-A-367,COND T73 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-257-8693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74A451006-1001
NSN: 4730-01-257-8693
FSC: 4730
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 SLEEVE
leg_length1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM ALL ENDS IN
material_document_and_classificationQQ-A-367,COND T73 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE
NSN4730-01-257-8693
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 74A451006-1001 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 7075 SLEEVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-367,COND T73 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE
•
LEG LENGTH: 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM ALL ENDS IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY 7075 SLEEVE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-367,COND T73 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE
LEG LENGTH1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM ALL ENDS IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
10109000Interchangeable
interchangeable cross-reference
interchangeable
62262Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 74A451006-1001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74A451006-1001?
74A451006-1001 is a SWING JOINT,PIPE TO TUBE.
What parts can replace 74A451006-1001?
There are 2 known substitutes for 74A451006-1001: 10109000, 62262. Substitute compatibility should be verified for your specific system.
What is the NSN for 74A451006-1001?
74A451006-1001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-257-8693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74A451006-1001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026