PartsTable
Technical Data Sheet
Download PDF

74917580-8 — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

74917580-8: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: ZINC, special_features: 2 HOLES 0.270 IN. DIA IN.

FLANGE 1.860 IN. C TO C IN, length_under_shoulder: 0.875 INCHES NOMINAL IN, closed_end_overall_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-117-3129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74917580-8
NSN: 5340-01-117-3129
FSC: 5340 — Hardware, Commercial
CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
materialZINC
special_features2 HOLES 0.270 IN. DIA IN. FLANGE 1.860 IN. C TO C IN
length_under_shoulder0.875 INCHES NOMINAL IN
closed_end_overall_diameter1.500 INCHES NOMINAL IN
NSN5340-01-117-3129
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 74917580-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 0.875 INCHES NOMINAL IN
•
MATERIAL: ZINC
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER1.500 INCHES NOMINAL IN
LENGTH UNDER SHOULDER0.875 INCHES NOMINAL IN
SPECIAL FEATURES2 HOLES 0.270 IN. DIA IN. FLANGE 1.860 IN. C TO C IN
MATERIALZINC
SUBSTITUTES & CROSS-REFERENCES 2
74908398Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1811-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 74917580-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74917580-8?
74917580-8 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 74917580-8?
There are 2 known substitutes for 74917580-8: 74908398, 1811-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 74917580-8?
74917580-8 is cataloged in the U.S. Government catalog under NSN 5340-01-117-3129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74917580-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.