The SLIDE SECTION,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 7075 OVERALL, section_length: 22.640 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: ANODIZE OVERALL, side_for_which_designed: LEFT HAND. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-243-0490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7489A23H23
NSN:5340-01-243-0490 FSC:5340 — Hardware, Commercial CAGE:18323 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA ELECTRONIC SYSTEMS (USA)
SPECIFICATIONS
width
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
material
ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 7075 OVERALL
section_length
22.640 INCHES NOMINAL IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
ANODIZE OVERALL
side_for_which_designed
LEFT HAND
material_document_and_classification
QQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classification
MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-01-243-0490
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
SECTION LENGTH: 22.640 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 7075 OVERALL
•
SIDE FOR WHICH DESIGNED: LEFT HAND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
SECTION LENGTH
22.640 INCHES NOMINAL IN
SURFACE TREATMENT
ANODIZE OVERALL
WIDTH
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
MATERIAL
ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 7075 OVERALL
SIDE FOR WHICH DESIGNED
LEFT HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7489A23H23?
7489A23H23 is a SLIDE SECTION,DRAWER,EXTENSION.
What parts can replace 7489A23H23?
There is 1 known substitute for 7489A23H23: B001-21-0524-40-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 7489A23H23?
7489A23H23 is cataloged in the U.S. Government catalog under NSN 5340-01-243-0490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.