PartsTable
Technical Data Sheet
Download PDF

748462-1 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

748462-1: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.990 INCHES NOMINAL IN, material: STEEL COMP 301 OVERALL, hole_diameter: 0.106 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), material_thickness: 0.0063 INCHES MINIMUM AND 0.0077 INCHES MAXIMUM IN, material_document_and_classification: AMS 5519 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-540-4419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
748462-1
NSN: 5340-00-540-4419
FSC: 5340 — Hardware, Commercial
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
width1.990 INCHES NOMINAL IN
materialSTEEL COMP 301 OVERALL
hole_diameter0.106 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.0063 INCHES MINIMUM AND 0.0077 INCHES MAXIMUM IN
material_document_and_classificationAMS 5519 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-540-4419
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 748462-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5519 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.0063 INCHES MINIMUM AND 0.0077 INCHES MAXIMUM IN
•
WIDTH: 1.990 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 301 OVERALL
•
HOLE DIAMETER: 0.106 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5519 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.0063 INCHES MINIMUM AND 0.0077 INCHES MAXIMUM IN
WIDTH1.990 INCHES NOMINAL IN
MATERIALSTEEL COMP 301 OVERALL
HOLE DIAMETER0.106 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 748462-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 748462-1?
748462-1 is a CLIP,SPRING TENSION.
What is the NSN for 748462-1?
748462-1 is cataloged in the U.S. Government catalog under NSN 5340-00-540-4419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 748462-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.