PartsTable
Technical Data Sheet
Download PDF

74844448-6 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

74844448-6: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES NOMINAL, material: STEEL OVERALL, fork_depth: 0.562 INCHES NOMINAL IN, angle_height: 0.312 INCHES NOMINAL IN, shank_length: 3.620 INCHES NOMINAL IN, thread_class: 2A ROD CONNECTION A. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-121-1962, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74844448-6
NSN: 5340-01-121-1962
FSC: 5340 — Hardware, Commercial
CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
angle45.0 DEGREES NOMINAL
materialSTEEL OVERALL
fork_depth0.562 INCHES NOMINAL IN
angle_height0.312 INCHES NOMINAL IN
shank_length3.620 INCHES NOMINAL IN
thread_class2A ROD CONNECTION A
hole_diameter0.376 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
overall_width2.000 INCHES NOMINAL IN
thread_length3.120 INCHES NOMINAL ROD CONNECTION IN
overall_height1.250 INCHES NOMINAL IN
shank_diameter1.125 INCHES NOMINAL IN
fork_span_width0.501 INCHES NOMINAL IN
NSN5340-01-121-1962
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 74844448-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.125 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.501 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.342 INCHES NOMINAL IN
•
THREAD LENGTH: 3.120 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 3.620 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: C 4140 H CFS,CAGEC 30612 MFR REF SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.125 INCHES NOMINAL IN
OVERALL HEIGHT1.250 INCHES NOMINAL IN
FORK SPAN WIDTH0.501 INCHES NOMINAL IN
FORK ARM THICKNESS0.342 INCHES NOMINAL IN
THREAD LENGTH3.120 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH3.620 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONC 4140 H CFS,CAGEC 30612 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH2.000 INCHES NOMINAL IN
ANGLE45.0 DEGREES NOMINAL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 74844448-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74844448-6?
74844448-6 is a CLEVIS,ROD END.
What is the NSN for 74844448-6?
74844448-6 is cataloged in the U.S. Government catalog under NSN 5340-01-121-1962. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74844448-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.