PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7476887P14
7476887P14 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1108 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK, nut_length: 0.500 INCHES NOMINAL IN, nut_diameter: 0.250 INCHES NOMINAL IN, thread_class: 2B. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-808-0799, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7476887P14
NSN: 5310-00-808-0799
FSC: 5310
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 1108 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK
nut_length0.500 INCHES NOMINAL IN
nut_diameter0.250 INCHES NOMINAL IN
thread_class2B
head_diameter0.385 INCHES NOMINAL IN
thread_seriesUNF
shank_end_typeOPEN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.190 INCHES IN
NSN5310-00-808-0799
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7476887P14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HEAD COUNTERSINK ANGLE: 100.00 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL COMP 1108 OVERALL
•
SHANK END TYPE: OPEN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH32
THREAD SERIESUNF
NOMINAL THREAD SIZE0.190 INCHES IN
HEAD COUNTERSINK ANGLE100.00 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1108 OVERALL
SHANK END TYPEOPEN
NUT DIAMETER0.250 INCHES NOMINAL IN
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
NPS5-2-2-5KIInterchangeable
interchangeable cross-reference
interchangeable
10136Interchangeable
interchangeable cross-reference
interchangeable
247ASC1739-001Interchangeable
interchangeable cross-reference
interchangeable
K41125K41286Interchangeable
interchangeable cross-reference
interchangeable
921364Interchangeable
interchangeable cross-reference
interchangeable
41125-41286Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7476887P14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7476887P14?
7476887P14 is a NUT,PLAIN,BLIND RIVET.
What parts can replace 7476887P14?
There are 19 known substitutes for 7476887P14: NPS5-2-2-5KI, 10136, 247ASC1739-001 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7476887P14?
7476887P14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-808-0799. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7476887P14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026