PartsTable
Technical Data Sheet
Download PDF

747-13 — WASHER,LOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

747-13: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, lug_width: 0.688 INCHES NOMINAL IN, overall_width: 0.6875 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-825-6637, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
747-13
NSN: 5340-00-825-6637
NIINs: 008256637, 012575047, 013916850
FSC: 5340 — Hardware, Commercial
CAGE: 81982 — HYDRO-AIRE AEROSPACE CORP (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
lug_width0.688 INCHES NOMINAL IN
overall_width0.6875 INCHES NOMINAL IN
style_designatorRIGHT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.140 INCHES NOMINAL IN
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.6875 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/5 TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.0625 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole1.125 INCHES NOMINAL IN
NSN5340-00-825-6637
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 747-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.140 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 1.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
LUG WIDTH: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.140 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE1.125 INCHES NOMINAL IN
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.199 INCHES NOMINAL IN
OVERALL WIDTH0.6875 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
LUG WIDTH0.688 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.0625 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 747-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 747-13?
747-13 is a WASHER,LOCK.
What is the NSN for 747-13?
747-13 is cataloged in the U.S. Government catalog under NSN 5340-00-825-6637. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 747-13