PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7463-000
7463-000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.375 INCHES NOMINAL IN, aperture_width: 3.375 INCHES NOMINAL IN, overall_length: 5.312 INCHES NOMINAL IN, aperture_length: 4.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-350-0472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7463-000
NSN: 5330-00-350-0472
FSC: 5330
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.375 INCHES NOMINAL IN
aperture_width3.375 INCHES NOMINAL IN
overall_length5.312 INCHES NOMINAL IN
aperture_length4.312 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity4
inside_corner_radius0.750 INCHES NOMINAL IN
outside_corner_radius0.469 INCHES NOMINAL IN
end_item_identificationFAMILY OF HEMTT VEHICLES (HEAVY EXPANDED MOIBLITY TACTICAL TRUCKS)
cross-sectional_thickness0.016 INCHES NOMINAL IN
NSN5330-00-350-0472
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7463-000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 3.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
END ITEM IDENTIFICATIONFAMILY OF HEMTT VEHICLES (HEAVY EXPANDED MOIBLITY TACTICAL TRUCKS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
INSIDE CORNER RADIUS0.750 INCHES NOMINAL IN
APERTURE WIDTH3.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
7463Interchangeable
interchangeable cross-reference
interchangeable
49-3C87-16Interchangeable
interchangeable cross-reference
interchangeable
101-44-8Interchangeable
interchangeable cross-reference
interchangeable
8027352Interchangeable
interchangeable cross-reference
interchangeable
2306-08-00Interchangeable
interchangeable cross-reference
interchangeable
7462-1/2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7463-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7463-000?
7463-000 is a GASKET.
What parts can replace 7463-000?
There are 22 known substitutes for 7463-000: 7463, 49-3C87-16, 101-44-8 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7463-000?
7463-000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-350-0472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7463-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026