Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES FIRST END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-036-7472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7460-503
NSN:4720-01-036-7472 FSC:4720 CAGE:04953 — EDO AIL SYSTEMS INC (USA)
SPECIFICATIONS
flow_angle
90.0 DEGREES FIRST END
seat_angle
37.0 DEGREES FIRST END
temp_rating
-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class
2B FIRST END
connection_type
THREADED INTERNAL TUBE FIRST END
inside_diameter
0.500 INCHES NOMINAL IN
connection_style
SWIVEL NUT FLARE FIRST END
outside_diameter
0.970 INCHES NOMINAL IN
thread_direction
RIGHT-HAND FIRST END
features_provided
REUSABLE END FITTINGS
operating_pressure
4250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
14000.0 POUNDS PER SQUARE INCH LBS
NSN
4720-01-036-7472
COMPONENT DIAGRAM
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 7.000 INCHES IN
•
INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
INSIDE SURFACE CONDITION: SMOOTH
•
NOMINAL THREAD SIZE: 0.750 INCHES FIRST END IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
THREAD SERIES DESIGNATOR: UNF FIRST END
•
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS
7.000 INCHES IN
INSIDE DIAMETER
0.500 INCHES NOMINAL IN
INSIDE SURFACE CONDITION
SMOOTH
NOMINAL THREAD SIZE
0.750 INCHES FIRST END IN
LAYER COMPOSITION AND LOCATION
1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
THREAD DIRECTION
RIGHT-HAND FIRST END
THREAD SERIES DESIGNATOR
UNF FIRST END
BURST TEST PRESSURE
14000.0 POUNDS PER SQUARE INCH LBS
END CONNECTION DESIGN
ELBOW FIRST END
TEMP RATING
-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7460-503?
7460-503 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 7460-503?
There are 21 known substitutes for 7460-503: 7460, 7480, 49-9C87-22 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7460-503?
7460-503 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-036-7472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.