PartsTable
Technical Data Sheet
Download PDF

74559 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
InLine · MRO · MRO_GENERAL
PRODUCT OVERVIEW

74559: RESISTOR,FIXED,WIRE WOUND.

Crimp connector RJ45 for stiff cables (installation cable !) up to AWG24. Key specifications include diameter: 2.3600 INCHES MINIMUM AND 2.3620 INCHES MAXIMUM IN, material: COPPER OVERALL, body_length: 8.500 INCHES NOMINAL IN, corner_shape: SQUARE ALL CORNERS, body_diameter: 1.125 INCHES NOMINAL IN, terminal_type: TAB W/SCREW. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-257-8242, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 74559
NSN: 5905-00-257-8242
NIINs: 002578242, 004483857, 007744706, 010462504
FSC: 5905 — Resistor
CAGE: 02574 — REGULATORS PRODUCTS GROUP OF WARD LEONARD ELECTRIC CO INC (USA)
SPECIFICATIONS
diameter2.3600 INCHES MINIMUM AND 2.3620 INCHES MAXIMUM IN
materialCOPPER OVERALL
body_length8.500 INCHES NOMINAL IN
corner_shapeSQUARE ALL CORNERS
body_diameter1.125 INCHES NOMINAL IN
terminal_typeTAB W/SCREW
inclosure_typeUNINCLOSED
terminal_length0.562 INCHES NOMINAL IN
outside_diameter2.9890 INCHES MINIMUM AND 2.9900 INCHES MAXIMUM IN
style_designatorROUND
overall_thickness0.4375 INCHES NOMINAL IN
electrical_resistance75.000 OHMS
NSN5905-00-257-8242
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: InLine RESISTOR,FIXED,WIRE WOUND TITLE COMPONENT PN 74559 MFR InLine RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
RESISTANCE TOLERANCE IN PERCENT: -10.000 TO 10.000
•
BODY DIAMETER: 1.125 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE: 75.000 OHMS
•
INCLOSURE TYPE: UNINCLOSED
•
TERMINAL TYPE: TAB W/SCREW
•
TERMINAL LENGTH: 0.562 INCHES NOMINAL IN
•
REACTANCE CHARACTERISTIC: INDUCTIVE
•
STYLE DESIGNATOR: RADIAL TERMINAL EACH END
TECHNICAL CHARACTERISTICS
RESISTANCE TOLERANCE IN PERCENT-10.000 TO 10.000
BODY DIAMETER1.125 INCHES NOMINAL IN
ELECTRICAL RESISTANCE75.000 OHMS
INCLOSURE TYPEUNINCLOSED
TERMINAL TYPETAB W/SCREW
TERMINAL LENGTH0.562 INCHES NOMINAL IN
REACTANCE CHARACTERISTICINDUCTIVE
STYLE DESIGNATORRADIAL TERMINAL EACH END
POWER DISSIPATION RATING IN WATTS160.000 FREE AIR
AMBIENT TEMP AT FULL RATED POWER50.0 CELSIUS DEGC
SUBSTITUTES & CROSS-REFERENCES 7
A39066Reference document
Same NSN cross-reference
Reference document — Secondary reference
25957-15-11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
K42958-75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-DTL-15109Reference document
Same NSN cross-reference
Reference document — Identification reference
A745-59-81Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILR15109AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 74559?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74559?
74559 is a RESISTOR,FIXED,WIRE WOUND manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What parts can replace 74559?
There are 7 known substitutes for 74559: A39066, 25957-15-11, K42958-75 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 74559?
74559 is cataloged in the U.S. Government catalog under NSN 5905-00-257-8242. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74559