PartsTable
Technical Data Sheet
Download PDF

74530T74850 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

74530T74850: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 1.3750 INCHES NOMINAL IN, cone_width: 1.8750 INCHES NOMINAL IN, bore_diameter: 5.3051 INCHES NOMINAL IN, overall_width: 1.8750 INCHES NOMINAL IN, standout_width: 0.5000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-101-5986, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74530T74850
NSN: 3110-00-101-5986
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.3750 INCHES NOMINAL IN
cone_width1.8750 INCHES NOMINAL IN
bore_diameter5.3051 INCHES NOMINAL IN
overall_width1.8750 INCHES NOMINAL IN
standout_width0.5000 INCHES NOMINAL IN
special_featuresBORE TAPER 9.0 DEG
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0620 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter8.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-101-5986
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 74530T74850 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 1.3750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 8.5000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.5000 INCHES NOMINAL IN
•
CONE WIDTH: 1.8750 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH1.3750 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH1.8750 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER8.5000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDOUT WIDTH0.5000 INCHES NOMINAL IN
CONE WIDTH1.8750 INCHES NOMINAL IN
SPECIAL FEATURESBORE TAPER 9.0 DEG
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 6
MAL1-811PC222Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MXT467PC222Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MX8-531BPC222Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C77837BVPC222Reference document
Same NSN cross-reference
Reference document — Secondary reference
C77837AQPC222Reference document
Same NSN cross-reference
Reference document — Secondary reference
C77837AVPC222Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 74530T74850?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74530T74850?
74530T74850 is a BEARING,ROLLER,TAPERED.
What parts can replace 74530T74850?
There are 6 known substitutes for 74530T74850: MAL1-811PC222, MXT467PC222, MX8-531BPC222 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 74530T74850?
74530T74850 is cataloged in the U.S. Government catalog under NSN 3110-00-101-5986. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74530T74850

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.