PartsTable
Technical Data Sheet
Download PDF

74525 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

74525: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, head_style: KNURLED NO. 1, head_height: 0.469 INCHES NOMINAL IN, point_style: HALF DOG, thread_class: 2A A, head_diameter: 0.625 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-3661, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74525
NSN: 3110-00-100-3661
NIINs: 001003661, 003700220, 014840524, 014840529, 014934620
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleKNURLED NO. 1
head_height0.469 INCHES NOMINAL IN
point_styleHALF DOG
thread_class2A A
head_diameter0.625 INCHES NOMINAL IN
thread_length0.312 INCHES MINIMUM IN
fastener_length1.405 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCHROMATE OVERALL
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch32
NSN3110-00-100-3661
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 74525 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.8750 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 5.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.8750 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER5.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
174819Reference document
Same NSN cross-reference
Reference document — Secondary reference
7136-03Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 74525?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74525?
74525 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 74525?
There are 2 known substitutes for 74525: 174819, 7136-03. Substitute compatibility should be verified for your specific system.
What is the NSN for 74525?
74525 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3661. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74525