PartsTable
Technical Data Sheet
Download PDF

7415051 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7415051: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.344 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 1.2965 INCHES NOMINAL IN, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.0747 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-495-9575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7415051
NSN: 5340-00-495-9575
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.344 INCHES NOMINAL IN
materialSTEEL COMP 1010 BAND
overall_width0.750 INCHES NOMINAL IN
overall_length1.2965 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.0747 INCHES NOMINAL IN
loop_inside_diameter0.345 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN
material_document_and_classificationASTMA108 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.0468 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end0.953 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.578 INCHES NOMINAL IN
NSN5340-00-495-9575
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7415051 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.344 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0747 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.0468 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.578 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA108 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER0.344 INCHES NOMINAL IN
OVERALL LENGTH1.2965 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.0747 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.0468 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.578 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 BAND
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END0.953 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
GPW2272Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7415051?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7415051?
7415051 is a CLAMP,LOOP.
What parts can replace 7415051?
There is 1 known substitute for 7415051: GPW2272. Substitute compatibility should be verified for your specific system.
What is the NSN for 7415051?
7415051 is cataloged in the U.S. Government catalog under NSN 5340-00-495-9575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7415051

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.