PartsTable
Technical Data Sheet
Download PDF

7415 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7415: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include overall_width: 1.500 INCHES NOMINAL IN, overall_length: 2.310 INCHES NOMINAL IN, special_features: TRIP FREE DESIGN CANNOT BE HELD ON DURING FAULT CURRENT C, trip_release_method: MAGNETIC-HYDRAULIC ALL LOCATIONS, unpackaged_unit_weight: 0.380 POUNDS NOMINAL LBS, part_name_assigned_by_controlling_agency: A SERIES FLAT ROCKER CIRCUIT BREAKER DOUBLE POLE 32A A. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-089-1119, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7415
NSN: 5330-00-089-1119
NIINs: 000891119, 001568190, 005309379, 006025426, 006473636, 008131794, 008530027, 010230007, 010406387, 010542006, 011600911, 011607940, 011640318, 011690298, 012401507, 015236649, 015627269, 016600429
FSC: 5330 — Packing and Gasket Materials
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
overall_width1.500 INCHES NOMINAL IN
pole_quantity2
overall_length2.310 INCHES NOMINAL IN
special_featuresTRIP FREE DESIGN CANNOT BE HELD ON DURING FAULT CURRENT C
trip_release_methodMAGNETIC-HYDRAULIC ALL LOCATIONS
unpackaged_unit_weight0.380 POUNDS NOMINAL LBS
part_name_assigned_by_controlling_agencyA SERIES FLAT ROCKER CIRCUIT BREAKER DOUBLE POLE 32A A
maximum_continuous_load_current_rating_per_pole32.000 AMPERES AC AND 32.000 AMPERES DC ALL LOCATIONS
operating_voltage_type_and_rating_per_pole_in_volts250.000 AC AND 32.000 DC ALL LOCATIONS
maximum_interrupting_capacity_current_type_and_rating_per_pole_in_amps3000.000 AC AND 5000.000 DC ALL LOCATIONS
NSN5330-00-089-1119
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7415 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 1.128 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.124 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 440B OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER1.128 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.124 INCHES NOMINAL IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 440B OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 CASE
SUBSTITUTES & CROSS-REFERENCES 2
9153476Reference document
Same NSN cross-reference
Reference document — Secondary reference
343185Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7415?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7415?
7415 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7415?
There are 2 known substitutes for 7415: 9153476, 343185. Substitute compatibility should be verified for your specific system.
What is the NSN for 7415?
7415 is cataloged in the U.S. Government catalog under NSN 5330-00-089-1119. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7415

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.