PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7414758
7414758 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, outside_diameter: 0.750 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.562 INCHES NOMINAL IN, cross-sectional_thickness: 0.015 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-741-4758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7414758
NSN: 5330-00-741-4758
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
outside_diameter0.750 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.562 INCHES NOMINAL IN
cross-sectional_thickness0.015 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-741-4758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7414758 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.015 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: CELLULOSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
APERTURE DIAMETER0.562 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.015 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORCIRCULAR
MATERIALCELLULOSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
A1115Interchangeable
interchangeable cross-reference
interchangeable
700220Interchangeable
interchangeable cross-reference
interchangeable
702006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7414758?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7414758?
7414758 is a GASKET.
What parts can replace 7414758?
There are 3 known substitutes for 7414758: A1115, 700220, 702006. Substitute compatibility should be verified for your specific system.
What is the NSN for 7414758?
7414758 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-741-4758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7414758

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026