PartsTable
Technical Data Sheet
Download PDF

7413532 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7413532: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.031 INCHES NOMINAL IN, diameter: 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.031 INCHES NOMINAL IN, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-741-3532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7413532
NSN: 5315-00-741-3532
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.031 INCHES NOMINAL IN
diameter0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.031 INCHES NOMINAL IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.250 INCHES NOMINAL IN
under_head_length0.515 INCHES NOMINAL IN
NSN5315-00-741-3532
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7413532 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.515 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.250 INCHES NOMINAL IN
•
DIAMETER: 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.031 INCHES NOMINAL IN
UNDER HEAD LENGTH0.515 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.250 INCHES NOMINAL IN
DIAMETER0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
HEAD STYLEFLAT
HEIGHT0.031 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
329688Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7413532?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7413532?
7413532 is a PIN,STRAIGHT,HEADED.
What parts can replace 7413532?
There is 1 known substitute for 7413532: 329688. Substitute compatibility should be verified for your specific system.
What is the NSN for 7413532?
7413532 is cataloged in the U.S. Government catalog under NSN 5315-00-741-3532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7413532

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.