PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7412792
7412792 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,SQUARE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SQUARE, nut_height: 0.178 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-1395, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7412792
NSN: 5310-00-013-1395
FSC: 5310
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSQUARE
nut_height0.178 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_across_flats0.423 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch20
NSN5310-00-013-1395
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7412792 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 20
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
BEARING SURFACE TYPE: FLAT
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
NUT STYLE: SQUARE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
THREAD QUANTITY PER INCH20
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
BEARING SURFACE TYPEFLAT
NOMINAL THREAD SIZE0.250 INCHES IN
THREAD DIRECTIONRIGHT-HAND
NUT STYLESQUARE
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
WIDTH ACROSS FLATS0.423 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MILB933TYPEBInterchangeable
interchangeable cross-reference
interchangeable
34141SInterchangeable
interchangeable cross-reference
interchangeable
103102Interchangeable
interchangeable cross-reference
interchangeable
FF-N-836E TYPE 1 STYLE 3Interchangeable
interchangeable cross-reference
interchangeable
103104Interchangeable
interchangeable cross-reference
interchangeable
103105Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7412792?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7412792?
7412792 is a NUT,PLAIN,SQUARE.
What parts can replace 7412792?
There are 23 known substitutes for 7412792: MILB933TYPEB, 34141S, 103102 and 20 more. Substitute compatibility should be verified for your specific system.
Is 7412792 still available?
7412792 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7412792

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026