PartsTable
Technical Data Sheet
Download PDF

741205-7BK — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

741205-7BK: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, bore_diameter: 2.3620 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN, overall_width: 1.3680 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, special_features: CERTIFIED FREE FROM MERCURY CONTAMINATION; SELECTED FOR QUIET OPERATION. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-209-8130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
741205-7BK
NSN: 3110-01-209-8130
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC RETAINER
bore_diameter2.3620 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN
overall_width1.3680 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
special_featuresCERTIFIED FREE FROM MERCURY CONTAMINATION; SELECTED FOR QUIET OPERATION
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
overall_outside_diameter5.9052 INCHES MINIMUM AND 5.9055 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
NSN3110-01-209-8130
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 741205-7BK · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
•
OVERALL OUTSIDE DIAMETER: 5.9052 INCHES MINIMUM AND 5.9055 INCHES MAXIMUM IN
•
LOAD DIRECTION: ANGULAR
•
BORE DIAMETER: 2.3620 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
OVERALL WIDTH1.3680 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER5.9052 INCHES MINIMUM AND 5.9055 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
SPECIAL FEATURESCERTIFIED FREE FROM MERCURY CONTAMINATION; SELECTED FOR QUIET OPERATION
BORE DIAMETER2.3620 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
Q30412DTS7087B4Reference document
Same NSN cross-reference
Reference document — Secondary reference
7412T1G02/GLPM/1WSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 741205-7BK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 741205-7BK?
741205-7BK is a BEARING,BALL,DUPLEX.
What parts can replace 741205-7BK?
There are 2 known substitutes for 741205-7BK: Q30412DTS7087B4, 7412T1G02/GLPM/1W. Substitute compatibility should be verified for your specific system.
What is the NSN for 741205-7BK?
741205-7BK is cataloged in the U.S. Government catalog under NSN 3110-01-209-8130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 741205-7BK