PartsTable
Technical Data Sheet
PartsTable / MRO / 7411B
7411B ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The GOVERNOR,DIESEL ENGINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 55.00 MILLIMETERS NOMINAL MM, overall_width: 33.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7411B
NSN: 3110-00-156-8141
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter55.00 MILLIMETERS NOMINAL MM
overall_width33.0 MILLIMETERS NOMINAL MM
pole_quantity2
load_directionANGULAR
surface_finishGROUND
special_featuresCMS DATA ID 2687, PCCN SE0533, PLISN A005
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
circuit_protection_typeOVERCURRENT ALL LOCATIONS
end_item_identificationPANEL, POWER DISTRIBUTION; SENTINEL CLASS FAST RESPONSE CUTTER B (FRC-B)
overall_outside_diameter140.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-8141
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7411B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
OVERALL OUTSIDE DIAMETER: 140.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL OUTSIDE DIAMETER140.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
BORE DIAMETER55.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
FFB171/31M07A2EInterchangeable
interchangeable cross-reference
interchangeable
7407BYInterchangeable
interchangeable cross-reference
interchangeable
FFB171/31Y07A2LInterchangeable
interchangeable cross-reference
interchangeable
2970Interchangeable
interchangeable cross-reference
interchangeable
72-6970-445Interchangeable
interchangeable cross-reference
interchangeable
7311PWFS179Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7411B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7411B?
7411B is a GOVERNOR,DIESEL ENGINE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7411B?
There are 33 known substitutes for 7411B: FFB171/31M07A2E, 7407BY, FFB171/31Y07A2L and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7411B?
7411B is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7411B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026