7411983 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

7411983: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 11.000 POUNDS MINIMUM AND 12.500 POUNDS MAXIMUM LBS, coil_quantity: 11, inside_diameter: 0.321 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-741-1983, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7411983

NSN: 5360-00-741-1983
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

material	STEEL OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
load_rating	11.000 POUNDS MINIMUM AND 12.500 POUNDS MAXIMUM LBS
coil_quantity	11
inside_diameter	0.321 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
spring_free_length	1.410 INCHES NOMINAL IN
spring_solid_length	0.520 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_length_under_load	0.740 INCHES NOMINAL IN
spring_free_outside_diameter	0.411 INCHES MINIMUM AND 0.423 INCHES MAXIMUM IN
spring_solid_outside_diameter	0.411 INCHES MINIMUM AND 0.423 INCHES MAXIMUM IN
NSN	5360-00-741-1983

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.411 INCHES MINIMUM AND 0.423 INCHES MAXIMUM IN

•

LOAD RATING: 11.000 POUNDS MINIMUM AND 12.500 POUNDS MAXIMUM LBS

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.520 INCHES NOMINAL IN

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-465,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 1.410 INCHES NOMINAL IN

•

INSIDE DIAMETER: 0.321 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.411 INCHES MINIMUM AND 0.423 INCHES MAXIMUM IN
LOAD RATING	11.000 POUNDS MINIMUM AND 12.500 POUNDS MAXIMUM LBS
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.520 INCHES NOMINAL IN
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-465,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	1.410 INCHES NOMINAL IN
INSIDE DIAMETER	0.321 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
SPRING LENGTH UNDER LOAD	0.740 INCHES NOMINAL IN
SPRING SOLID OUTSIDE DIAMETER	0.411 INCHES MINIMUM AND 0.423 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

122Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 7411983?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7411983?

7411983 is a SPRING,HELICAL,COMPRESSION.

What parts can replace 7411983?

There is 1 known substitute for 7411983: 122. Substitute compatibility should be verified for your specific system.

What is the NSN for 7411983?

7411983 is cataloged in the U.S. Government catalog under NSN 5360-00-741-1983. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7411983 — SPRING,HELICAL,COMPRESSION

Request a Quote — 7411983