PartsTable
Technical Data Sheet
Download PDF

7411515 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7411515: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, outside_diameter: 13.875 INCHES NOMINAL IN, aperture_diameter: 12.500 INCHES NOMINAL IN, bolt_circle_diameter: 13.312 INCHES NOMINAL IN, cross-sectional_thickness: 0.010 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-741-1515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7411515
NSN: 5330-00-741-1515
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPAPER OVERALL
outside_diameter13.875 INCHES NOMINAL IN
aperture_diameter12.500 INCHES NOMINAL IN
bolt_circle_diameter13.312 INCHES NOMINAL IN
cross-sectional_thickness0.010 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3200-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-741-1515
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7411515 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3200-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 13.875 INCHES NOMINAL IN
•
APERTURE DIAMETER: 12.500 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 13.312 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.010 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3200-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER13.875 INCHES NOMINAL IN
APERTURE DIAMETER12.500 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER13.312 INCHES NOMINAL IN
MATERIALPAPER OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
8613526Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7411515?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7411515?
7411515 is a GASKET.
What parts can replace 7411515?
There is 1 known substitute for 7411515: 8613526. Substitute compatibility should be verified for your specific system.
What is the NSN for 7411515?
7411515 is cataloged in the U.S. Government catalog under NSN 5330-00-741-1515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7411515