PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7411430

7411430 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,OIL,HUB BEARING is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-741-1430, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7411430
NSN: 5330-00-741-1430
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
Part Number7411430
NSN5330-00-741-1430
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7411430 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL,NO. 16 B.W. GA/0.065/SAE 1010 OR 1015 H.R. ANNEALED;4.499 IN. MIN,4.501 IN. MAX HUB DIA;4.540 IN. MIN,4.560 IN. MAX OD;2.641 IN. ID;51 HOLES,0.078 IN. DIA EQUALLY SPACED FOR ANCHORAGE;4.063 IN. DIA OF HOLE FROM CENTERS IN
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONSTEEL,NO. 16 B.W. GA/0.065/SAE 1010 OR 1015 H.R. ANNEALED;4.499 IN. MIN,4.501 IN. MAX HUB DIA;4.540 IN. MIN,4.560 IN. MAX OD;2.641 IN. ID;51 HOLES,0.078 IN. DIA EQUALLY SPACED FOR ANCHORAGE;4.063 IN. DIA OF HOLE FROM CENTERS IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
49961Interchangeable
interchangeable cross-reference
interchangeable
3059J1-500MInterchangeable
interchangeable cross-reference
interchangeable
659-2Interchangeable
interchangeable cross-reference
interchangeable
100-17-005-002Interchangeable
interchangeable cross-reference
interchangeable
DA6592Interchangeable
interchangeable cross-reference
interchangeable
14U1016PCDA6592Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7411430?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7411430?
7411430 is a SEAL,OIL,HUB BEARING.
What parts can replace 7411430?
There are 11 known substitutes for 7411430: 49961, 3059J1-500M, 659-2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7411430?
7411430 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-741-1430. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7411430

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026