7411040 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

7411040: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, special_features: TWO FLAT SURFACES 0.500 IN. LONG BY 0.500 IN.

WIDE ACROSS FLATS LOCATED PERPENDICULAR TO AXIS OF HOLE ON A END IN, pin_overall_length: 5.109 INCHES MINIMUM AND 5.141 INCHES MAXIMUM IN, first_hole_diameter: 0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, pin_overall_diameter: 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 5315-00-741-1040, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7411040

NSN: 5315-00-741-1040
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

material	STEEL OVERALL
first_end_style	CHAMFERED
special_features	TWO FLAT SURFACES 0.500 IN. LONG BY 0.500 IN. WIDE ACROSS FLATS LOCATED PERPENDICULAR TO AXIS OF HOLE ON A END IN
pin_overall_length	5.109 INCHES MINIMUM AND 5.141 INCHES MAXIMUM IN
first_hole_diameter	0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
pin_overall_diameter	0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
first_end_taper_angle	44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
first_end_taper_length	0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
hole_arrangement_style	ONE END DRILLED
second_end_relationship_with_first_end	IDENTICAL
distance_from_centerline_of_hole_to_end_of_pin	0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
NSN	5315-00-741-1040

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST END TAPER LENGTH: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

FIRST END STYLE: CHAMFERED

•

FIRST HOLE DIAMETER: 0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

FIRST END TAPER ANGLE: 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM

•

PIN OVERALL DIAMETER: 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN

•

PIN OVERALL LENGTH: 5.109 INCHES MINIMUM AND 5.141 INCHES MAXIMUM IN

•

SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL

TECHNICAL CHARACTERISTICS

FIRST END TAPER LENGTH	0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLE	ONE END DRILLED
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
FIRST END TAPER ANGLE	44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER	0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
PIN OVERALL LENGTH	5.109 INCHES MINIMUM AND 5.141 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
SPECIAL FEATURES	TWO FLAT SURFACES 0.500 IN. LONG BY 0.500 IN. WIDE ACROSS FLATS LOCATED PERPENDICULAR TO AXIS OF HOLE ON A END IN
MATERIAL	STEEL OVERALL

SUBSTITUTES & CROSS-REFERENCES 1

299211Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 7411040?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7411040?

7411040 is a PIN,STRAIGHT,HEADLESS.

What parts can replace 7411040?

There is 1 known substitute for 7411040: 299211. Substitute compatibility should be verified for your specific system.

What is the NSN for 7411040?

7411040 is cataloged in the U.S. Government catalog under NSN 5315-00-741-1040. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7411040 — PIN,STRAIGHT,HEADLESS

Request a Quote — 7411040