PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7411039
7411039 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1117 OVERALL, first_end_style: CHAMFERED, special_features: TWO FLATS 0.500 IN. W ACROSS BY 0.500 IN.

LG LOCATED PERPENDICULAR TO HOLE ON A END IN, pin_overall_length: 7.000 INCHES NOMINAL IN, first_hole_diameter: 0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, pin_overall_diameter: 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-741-1039, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7411039
NSN: 5315-00-741-1039
FSC: 5315
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1117 OVERALL
first_end_styleCHAMFERED
special_featuresTWO FLATS 0.500 IN. W ACROSS BY 0.500 IN. LG LOCATED PERPENDICULAR TO HOLE ON A END IN
pin_overall_length7.000 INCHES NOMINAL IN
first_hole_diameter0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
pin_overall_diameter0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
first_end_taper_angle44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
first_end_taper_length0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
distance_from_centerline_of_hole_to_end_of_pin0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
NSN5315-00-741-1039
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7411039 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1117 OVERALL
•
FIRST HOLE DIAMETER: 0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 7.000 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESTWO FLATS 0.500 IN. W ACROSS BY 0.500 IN. LG LOCATED PERPENDICULAR TO HOLE ON A END IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1117 OVERALL
FIRST HOLE DIAMETER0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
PIN OVERALL LENGTH7.000 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
FIRST END TAPER LENGTH0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
109233Interchangeable
interchangeable cross-reference
interchangeable
296742Interchangeable
interchangeable cross-reference
interchangeable
7423117647Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7411039?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7411039?
7411039 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 7411039?
There are 3 known substitutes for 7411039: 109233, 296742, 7423117647. Substitute compatibility should be verified for your specific system.
What is the NSN for 7411039?
7411039 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-741-1039. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7411039

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026