PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 74100
74100 ✓ Verified by PartsTable
InLine · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Modular crimping tool for setting up LAN and ISDN communication cables with RJ45 8pin (8P/8C) connectors. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: CAP, thickness: 0.062 INCHES NOMINAL IN, nut_height: 0.250 INCHES NOMINAL IN, thread_class: 2B, hole_diameter: 0.188 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-530-0631, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74100
NSN: 5310-00-530-0631
FSC: 5310
CAGE: 70408 — AT AND T CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleCAP
thickness0.062 INCHES NOMINAL IN
nut_height0.250 INCHES NOMINAL IN
thread_class2B
hole_diameter0.188 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_diameter0.375 INCHES NOMINAL IN
special_features150LB CLASS,W/FLANGE LBS
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.250 INCHES NOMINAL IN
NSN5310-00-530-0631
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 74100 · InLine ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.062 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: LEATHER OVERALL
•
OVERALL DIAMETER: 0.375 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.062 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
MATERIALLEATHER OVERALL
OVERALL DIAMETER0.375 INCHES NOMINAL IN
HOLE DIAMETER0.188 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
524Interchangeable
interchangeable cross-reference
interchangeable
1546148-1Interchangeable
interchangeable cross-reference
interchangeable
MD524Interchangeable
interchangeable cross-reference
interchangeable
H35-0001-202Interchangeable
interchangeable cross-reference
interchangeable
74100ADXInterchangeable
interchangeable cross-reference
interchangeable
10185-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 74100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74100?
74100 is a TERMINAL JUNCTION BLOCK,SECTIONA manufactured by InLine.
What parts can replace 74100?
There are 11 known substitutes for 74100: 524, 1546148-1, MD524 and 8 more. Substitute compatibility should be verified for your specific system.
Is 74100 still available?
74100 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026