PartsTable
Technical Data Sheet
Download PDF

741-6403 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

741-6403: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.250 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: BALL SHAFT, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.719 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-983-9320, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 741-6403
NSN: 5905-00-983-9320
FSC: 5905 — Resistor
CAGE: 04454 — SENSOR SYSTEMS, L.L.C. DBA SENSOR SYSTEMS LLC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.250 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.719 INCHES MAXIMUM IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter1.125 INCHES MAXIMUM IN
cubic_measure1.582 CUBIC INCHES
lateral_runout0.001 INCHES IN
overall_length1.969 INCHES MAXIMUM IN
NSN5905-00-983-9320
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 741-6403 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 0.30 INCH-OUNCES IN
•
BODY DIAMETER: 1.125 INCHES MAXIMUM IN
•
LATERAL RUNOUT: 0.001 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 471.3707 OHMS ALL SECTIONS
•
MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 ALL SECTIONS
•
UNDERCUT WIDTH: 0.0570 INCHES MINIMUM IN
•
SECTION QUANTITY: 2
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE0.30 INCH-OUNCES IN
BODY DIAMETER1.125 INCHES MAXIMUM IN
LATERAL RUNOUT0.001 INCHES IN
ELECTRICAL RESISTANCE PER SECTION471.3707 OHMS ALL SECTIONS
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 ALL SECTIONS
UNDERCUT WIDTH0.0570 INCHES MINIMUM IN
SECTION QUANTITY2
SHAFT DIAMETER0.1249 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.975 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059
SUBSTITUTES & CROSS-REFERENCES 2
5839K70P3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
741-6493Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 741-6403?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 741-6403?
741-6403 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 741-6403?
There are 2 known substitutes for 741-6403: 5839K70P3, 741-6493. Substitute compatibility should be verified for your specific system.
What is the NSN for 741-6403?
741-6403 is cataloged in the U.S. Government catalog under NSN 5905-00-983-9320. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 741-6403