PartsTable
Technical Data Sheet
Download PDF

7409924 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7409924: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 1.625 INCHES NOMINAL IN, fork_depth: 1.375 INCHES NOMINAL IN, shank_length: 3.125 INCHES NOMINAL IN, hole_diameter: 1.516 INCHES NOMINAL IN, overall_width: 3.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-740-9924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7409924
NSN: 5340-00-740-9924
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius1.625 INCHES NOMINAL IN
fork_depth1.375 INCHES NOMINAL IN
shank_length3.125 INCHES NOMINAL IN
hole_diameter1.516 INCHES NOMINAL IN
overall_width3.750 INCHES NOMINAL IN
overall_height3.500 INCHES NOMINAL IN
shank_diameter3.750 INCHES NOMINAL IN
fork_span_width1.625 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness1.062 INCHES NOMINAL IN
rod_connection_bore_depth4.625 INCHES NOMINAL IN
NSN5340-00-740-9924
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7409924 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 3.750 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 1.625 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 1.062 INCHES NOMINAL IN
•
END RADIUS: 1.625 INCHES NOMINAL IN
•
SHANK LENGTH: 3.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER3.750 INCHES NOMINAL IN
OVERALL HEIGHT3.500 INCHES NOMINAL IN
FORK SPAN WIDTH1.625 INCHES NOMINAL IN
FORK ARM THICKNESS1.062 INCHES NOMINAL IN
END RADIUS1.625 INCHES NOMINAL IN
SHANK LENGTH3.125 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH3.750 INCHES NOMINAL IN
ROD CONNECTION BORE DIAMETER1.566 INCHES MINIMUM IN
ROD CONNECTION BORE DEPTH4.625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
KC9428Reference document
Same NSN cross-reference
Reference document — Secondary reference
HCU243Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7409924?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7409924?
7409924 is a CLEVIS,ROD END.
What parts can replace 7409924?
There are 2 known substitutes for 7409924: KC9428, HCU243. Substitute compatibility should be verified for your specific system.
What is the NSN for 7409924?
7409924 is cataloged in the U.S. Government catalog under NSN 5340-00-740-9924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7409924