PartsTable
Technical Data Sheet
Download PDF

7409361 — BEARING,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7409361: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE AND TAPERED, first_leg_width: 4.125 INCHES NOMINAL IN, first_leg_length: 1.062 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-740-9361, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7409361
NSN: 5340-00-740-9361
NIINs: 007409361, 015006155
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1020
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE AND TAPERED
first_leg_width4.125 INCHES NOMINAL IN
first_leg_length1.062 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width4.125 INCHES NOMINAL IN
special_featuresSLOT IN FIRST LEG 0.625 IN. W 67 DEG ANGLE IN
style_designatorANGLE
second_leg_length1.187 INCHES NOMINAL IN
surface_treatmentENAMEL
first_leg_thickness0.120 INCHES NOMINAL IN
NSN5340-00-740-9361
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7409361 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.337 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.406 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.875 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.437 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 4.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.375 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.337 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.406 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.875 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.437 INCHES NOMINAL IN
SECOND LEG WIDTH4.125 INCHES NOMINAL IN
SECOND LEG LENGTH1.187 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SUBSTITUTES & CROSS-REFERENCES 2
KC6490Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340007409361Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7409361?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7409361?
7409361 is a BEARING,SLEEVE.
What parts can replace 7409361?
There are 2 known substitutes for 7409361: KC6490, 5340007409361. Substitute compatibility should be verified for your specific system.
What is the NSN for 7409361?
7409361 is cataloged in the U.S. Government catalog under NSN 5340-00-740-9361. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7409361