PartsTable
Technical Data Sheet
Download PDF

7408867 — SCREW,PANEL FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

7408867: SCREW,PANEL FASTENER.

The SCREW,PANEL FASTENER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.350 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.574 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN, thread_length: 0.295 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-525-3527, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7408867
NSN: 5305-01-525-3527
FSC: 5305 — Screws
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.350 INCHES NOMINAL IN
thread_class2A A
head_diameter0.574 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
thread_length0.295 INCHES NOMINAL IN
fastener_length0.645 INCHES NOMINAL IN
countersink_angle29.3 DEGREES MINIMUM AND 30.8 DEGREES MAXIMUM
width_across_flats0.188 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch20
NSN5305-01-525-3527
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7408867 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.350 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.645 INCHES NOMINAL IN
•
THREAD LENGTH: 0.295 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
INTERNAL DRIVE STYLE: HEXAGON
•
COUNTERSINK ANGLE: 29.3 DEGREES MINIMUM AND 30.8 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.188 INCHES NOMINAL IN
HEAD HEIGHT0.350 INCHES NOMINAL IN
FASTENER LENGTH0.645 INCHES NOMINAL IN
THREAD LENGTH0.295 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLEHEXAGON
COUNTERSINK ANGLE29.3 DEGREES MINIMUM AND 30.8 DEGREES MAXIMUM
THREAD CLASS2A A
THREAD QUANTITY PER INCH20
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7408867?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7408867?
7408867 is a SCREW,PANEL FASTENER.
What is the NSN for 7408867?
7408867 is cataloged in the U.S. Government catalog under NSN 5305-01-525-3527. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7408867