PartsTable
Technical Data Sheet
Download PDF

740734 — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

740734: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 3.3462 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN, surface_finish: GROUND, inner_ring_width: 0.9005 INCHES MINIMUM AND 0.9055 INCHES MAXIMUM IN, locating_feature: NONLOCATING, outer_ring_width: 1.0750 INCHES MINIMUM AND 1.0800 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-633-7555, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
740734
NSN: 5330-00-633-7555
NIINs: 006337555, 007401117
FSC: 5330 — Packing and Gasket Materials
CAGE: 03956 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter3.3462 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
surface_finishGROUND
inner_ring_width0.9005 INCHES MINIMUM AND 0.9055 INCHES MAXIMUM IN
locating_featureNONLOCATING
outer_ring_width1.0750 INCHES MINIMUM AND 1.0800 INCHES MAXIMUM IN
internal_clearance0.0025 INCHES MINIMUM RADIAL AND 0.0045 INCHES MAXIMUM RADIAL IN
overall_outside_diameter4.9209 INCHES MINIMUM AND 4.9213 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationRBEC NO.5
NSN5330-00-633-7555
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 740734 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE CORNER RADIUS: 0.187 INCHES NOMINAL IN
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 3.875 INCHES NOMINAL IN
•
APERTURE LENGTH: 4.687 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
INSIDE CORNER RADIUS0.187 INCHES NOMINAL IN
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
OVERALL LENGTH5.687 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.875 INCHES NOMINAL IN
APERTURE WIDTH3.875 INCHES NOMINAL IN
APERTURE LENGTH4.687 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.187 INCHES NOMINAL IN
MATERIALRUBBER OVERALL
HOLE DIAMETER0.216 INCHES MINIMUM AND 0.224 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 740734?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 740734?
740734 is a BEARING,ROLLER,CYLINDRICAL.
What is the NSN for 740734?
740734 is cataloged in the U.S. Government catalog under NSN 5330-00-633-7555. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 740734