PartsTable
Technical Data Sheet
Download PDF

74062791 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

74062791: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include width: 0.690 INCHES NOMINAL IN, body_width: 0.220 INCHES NOMINAL IN, end_radius: 0.280 INCHES NOMINAL IN, center_radius: 0.250 INCHES NOMINAL IN, style_designator: DOUBLE CONCAVE, mounting_hole_diameter: 0.270 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-001-5038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74062791
NSN: 5340-00-001-5038
FSC: 5340 — Hardware, Commercial
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
width0.690 INCHES NOMINAL IN
body_width0.220 INCHES NOMINAL IN
end_radius0.280 INCHES NOMINAL IN
center_radius0.250 INCHES NOMINAL IN
style_designatorDOUBLE CONCAVE
mounting_hole_diameter0.270 INCHES NOMINAL IN
distance_between_mounting_hole_centers1.900 INCHES NOMINAL IN
NSN5340-00-001-5038
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 74062791 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.900 INCHES NOMINAL IN
•
CENTER RADIUS: 0.250 INCHES NOMINAL IN
•
END RADIUS: 0.280 INCHES NOMINAL IN
•
BODY WIDTH: 0.220 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DOUBLE CONCAVE
•
MOUNTING HOLE DIAMETER: 0.270 INCHES NOMINAL IN
•
WIDTH: 0.690 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.900 INCHES NOMINAL IN
CENTER RADIUS0.250 INCHES NOMINAL IN
END RADIUS0.280 INCHES NOMINAL IN
BODY WIDTH0.220 INCHES NOMINAL IN
STYLE DESIGNATORDOUBLE CONCAVE
MOUNTING HOLE DIAMETER0.270 INCHES NOMINAL IN
WIDTH0.690 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-003-0832 5340-00-003-1792 5340-00-003-1794 5340-00-003-1909 5340-00-003-5082 5340-00-003-5083 5340-00-003-5434 5340-00-003-5993
SUBSTITUTES & CROSS-REFERENCES 1
74059992-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 74062791?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74062791?
74062791 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace 74062791?
There is 1 known substitute for 74062791: 74059992-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 74062791?
74062791 is cataloged in the U.S. Government catalog under NSN 5340-00-001-5038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74062791