PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 74051342
74051342 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL COMP 1010 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.370 INCHES NOMINAL IN, overall_length: 0.875 INCHES NOMINAL IN, special_features: NON TURN BENT TAB ON MOUNTING HOLE END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-105-6069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74051342
NSN: 5340-00-105-6069
FSC: 5340
CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 1010 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.370 INCHES NOMINAL IN
overall_length0.875 INCHES NOMINAL IN
special_featuresNON TURN BENT TAB ON MOUNTING HOLE END
style_designatorCURVED ARCH
surface_treatmentCADMIUM
material_thickness0.080 INCHES NOMINAL IN
mounting_hole_size0.172 INCHES NOMINAL IN
inside_diameter/arch_length0.125 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.031 INCHES NOMINAL IN
NSN5340-00-105-6069
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 74051342 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.031 INCHES NOMINAL IN
•
MOUNTING HOLE SIZE: 0.172 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
SURFACE TREATMENT: CADMIUM
•
CUSHION: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH0.875 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.031 INCHES NOMINAL IN
SPECIAL FEATURESNON TURN BENT TAB ON MOUNTING HOLE END
MOUNTING HOLE SIZE0.172 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
SURFACE TREATMENTCADMIUM
CUSHIONNOT INCLUDED
OVERALL WIDTH0.370 INCHES NOMINAL IN
MATERIAL THICKNESS0.080 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
ASTM B221Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
C1107Interchangeable
interchangeable cross-reference
interchangeable
C1107GInterchangeable
interchangeable cross-reference
interchangeable
4820PL1205173Interchangeable
interchangeable cross-reference
interchangeable
56169Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 74051342?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74051342?
74051342 is a STRAP,RETAINING.
What parts can replace 74051342?
There are 7 known substitutes for 74051342: ASTM B221, AMS-QQ-A-200/11, C1107 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 74051342?
74051342 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-105-6069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74051342

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026