PartsTable
Technical Data Sheet
Download PDF

7404620 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7404620: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.500 INCHES NOMINAL IN, fork_depth: 0.531 INCHES NOMINAL IN, shank_length: 2.000 INCHES NOMINAL IN, hole_diameter: 0.314 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, overall_width: 0.864 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-740-4620, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7404620
NSN: 5340-00-740-4620
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.500 INCHES NOMINAL IN
fork_depth0.531 INCHES NOMINAL IN
shank_length2.000 INCHES NOMINAL IN
hole_diameter0.314 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
overall_width0.864 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN
overall_height0.750 INCHES NOMINAL IN
shank_diameter0.375 INCHES NOMINAL IN
fork_span_width0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
special_featuresINCLUDES BRACKET PN 7404622 AND PIN PN 7404621
style_designatorCLEVIS
surface_treatmentPHOSPHATE OVERALL
NSN5340-00-740-4620
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7404620 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.375 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.120 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-12968,TYPE A-CANCELED MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.500 INCHES NOMINAL IN
•
SHANK LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.188 INCHES NOMINAL IN
FORK ARM THICKNESS0.120 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-12968,TYPE A-CANCELED MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.500 INCHES NOMINAL IN
SHANK LENGTH2.000 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.864 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340007404620Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7404620?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7404620?
7404620 is a CLEVIS,ROD END.
What parts can replace 7404620?
There is 1 known substitute for 7404620: 5340007404620. Substitute compatibility should be verified for your specific system.
What is the NSN for 7404620?
7404620 is cataloged in the U.S. Government catalog under NSN 5340-00-740-4620. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7404620