PartsTable
Technical Data Sheet
Download PDF

7402792 — GASKET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7402792: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.375 INCHES NOMINAL IN, overall_length: 16.500 INCHES NOMINAL IN, special_features: GASKET THICKNESS IS 0.062 INCHES. IN, style_designator: NON-CIRCULAR.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-740-2792, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7402792
NSN: 5310-00-740-2792
NIINs: 007402792, 015700641
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.375 INCHES NOMINAL IN
overall_length16.500 INCHES NOMINAL IN
special_featuresGASKET THICKNESS IS 0.062 INCHES. IN
style_designatorNON-CIRCULAR
bolt_hole_quantity16
part_name_assigned_by_controlling_agencyGASKET COVER
outside_edge_to_inside_edge_smallest_distance_along_length0.375 INCHES NOMINAL IN
NSN5310-00-740-2792
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7402792 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
OUTSIDE DIAMETER: 0.945 INCHES MINIMUM AND 0.965 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT INTERNAL TEETH
OUTSIDE DIAMETER0.945 INCHES MINIMUM AND 0.965 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
60-77312Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7402792?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7402792?
7402792 is a GASKET.
What parts can replace 7402792?
There is 1 known substitute for 7402792: 60-77312. Substitute compatibility should be verified for your specific system.
What is the NSN for 7402792?
7402792 is cataloged in the U.S. Government catalog under NSN 5310-00-740-2792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7402792

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.