PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7402470
7402470 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DISK,SOLID,PLAIN is a the manufacturer industrial component. Key specifications include diameter: 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING, thickness: 0.060 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, fsc_application_data: GOVERNOR ASSY,GASOLINE ENGINE, machined_surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-352-8627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7402470
NSN: 5340-00-352-8627
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING
thickness0.060 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
fsc_application_dataGOVERNOR ASSY,GASOLINE ENGINE
machined_surface_finishGROUND
NSN5340-00-352-8627
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7402470 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
•
MACHINED SURFACE FINISH: GROUND
•
THICKNESS: 0.060 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
FSC APPLICATION DATA: GOVERNOR ASSY,GASOLINE ENGINE
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
MACHINED SURFACE FINISHGROUND
THICKNESS0.060 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
FSC APPLICATION DATAGOVERNOR ASSY,GASOLINE ENGINE
MATERIALSTEEL CORROSION RESISTING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
5004-1Interchangeable
interchangeable cross-reference
interchangeable
SC-C-69992-20Interchangeable
interchangeable cross-reference
interchangeable
108927Interchangeable
interchangeable cross-reference
interchangeable
09-5719Interchangeable
interchangeable cross-reference
interchangeable
5250E9106Interchangeable
interchangeable cross-reference
interchangeable
JHP85-139Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7402470?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7402470?
7402470 is a DISK,SOLID,PLAIN.
What parts can replace 7402470?
There are 17 known substitutes for 7402470: 5004-1, SC-C-69992-20, 108927 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7402470?
7402470 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-352-8627. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7402470

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026