PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 74014
74014 ✓ Verified by PartsTable
InLine · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Replacement anti-kink sleeve for RJ45 plug.<br>- Fits our art. no. 74500 and 74000<br>- Color: red.

Key specifications include duty_cycle: INTERMITTENT, temp_rating: -55.0 OPERATING CELSIUS AND 93.0 OPERATING CELSIUS, winding_type: SHUNT WOUND, overall_width: 2.500 INCHES IN, time_interval: 6.0 SECONDS MAXIMUM ON AND 30.0 SECONDS MINIMUM OFF, cooling_method: NONVENTILATED. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-108-1125, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74014
NSN: 5330-00-108-1125
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
duty_cycleINTERMITTENT
temp_rating-55.0 OPERATING CELSIUS AND 93.0 OPERATING CELSIUS
winding_typeSHUNT WOUND
overall_width2.500 INCHES IN
time_interval6.0 SECONDS MAXIMUM ON AND 30.0 SECONDS MINIMUM OFF
cooling_methodNONVENTILATED
overall_height2.500 INCHES IN
overall_length4.987 INCHES IN
shaft_diameter0.416 INCHES NOMINAL SINGLE END IN
mounting_methodPAD
enclosure_featureTOTALLY ENCLOSED
features_providedFRAME ELECTRICALLY GROUNDED AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
NSN5330-00-108-1125
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 74014 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
110 7/32Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
C12075Interchangeable
interchangeable cross-reference
interchangeable
74014Interchangeable
interchangeable cross-reference
interchangeable
7016842-4Interchangeable
interchangeable cross-reference
interchangeable
7002LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 74014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74014?
74014 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by InLine.
What parts can replace 74014?
There are 9 known substitutes for 74014: 110 7/32, B94.11M, C12075 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 74014?
74014 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-108-1125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026