PartsTable
Technical Data Sheet
Download PDF

7393435 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7393435: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 8640 OR STEEL COMP 5140 OR STEEL COMP 8740 OVERALL, nut_style: SLEEVE, nut_length: 0.875 INCHES NOMINAL IN, nut_diameter: 1.480 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNS. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-739-3435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7393435
NSN: 5310-00-739-3435
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 8640 OR STEEL COMP 5140 OR STEEL COMP 8740 OVERALL
nut_styleSLEEVE
nut_length0.875 INCHES NOMINAL IN
nut_diameter1.480 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNS
flange_thickness0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.073 INCHES IN
cross-sectional_shapeROUND NUT
thread_quantity_per_inch14
NSN5310-00-739-3435
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7393435 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 2.000 INCHES NOMINAL IN
•
NUT LENGTH: 0.875 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FLANGE THICKNESS: 0.625 INCHES NOMINAL IN
•
THREAD SERIES: UNS
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.073 INCHES IN
•
NUT DIAMETER: 1.480 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS2.000 INCHES NOMINAL IN
NUT LENGTH0.875 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FLANGE THICKNESS0.625 INCHES NOMINAL IN
THREAD SERIESUNS
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.073 INCHES IN
NUT DIAMETER1.480 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
CROSS-SECTIONAL SHAPEROUND NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
5310007393435Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7393435?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7393435?
7393435 is a NUT,SLEEVE.
What parts can replace 7393435?
There is 1 known substitute for 7393435: 5310007393435. Substitute compatibility should be verified for your specific system.
What is the NSN for 7393435?
7393435 is cataloged in the U.S. Government catalog under NSN 5310-00-739-3435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7393435