PartsTable
Technical Data Sheet
Download PDF

73912 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
Indesit · ORING SEAL
PRODUCT OVERVIEW

73912: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a Indesit industrial component. Key specifications include material: STEEL OVERALL, tip_type: PHILLIPS CROSS, overall_length: 70.0 MILLIMETERS NOMINAL MM, drive_shank_type: MALE HEXAGON W/NOTCH, special_features: 2 PER PACKAGE, drive_nominal_size: 0.25 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-071-6613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
73912
NSN: 5340-01-071-6613
NIINs: 010716613, 011177471, 014425812, 017189354
FSC: 5340 — Hardware, Commercial
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
tip_typePHILLIPS CROSS
overall_length70.0 MILLIMETERS NOMINAL MM
drive_shank_typeMALE HEXAGON W/NOTCH
special_features2 PER PACKAGE
drive_nominal_size0.25 INCHES IN
tip_size_designation00
part_name_assigned_by_controlling_agencyPOWER BIT
NSN5340-01-071-6613
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 73912 MFR: Indesit ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.173 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC AND HEAT
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.828 INCHES NOMINAL IN
•
FASTENING DEVICE TYPE: LUG
•
STYLE DESIGNATOR: LEFT HAND CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4TEMPERT4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.173 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.173 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL, AROMATIC AND HEAT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.828 INCHES NOMINAL IN
FASTENING DEVICE TYPELUG
STYLE DESIGNATORLEFT HAND CLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4TEMPERT4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.173 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
LUG WIDTH0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 73912?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 73912?
73912 is a HOSE ASSEMBLY,NONMETALLIC manufactured by Indesit.
What is the NSN for 73912?
73912 is cataloged in the U.S. Government catalog under NSN 5340-01-071-6613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 73912

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.