PartsTable
Technical Data Sheet
Download PDF

7390602 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7390602: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL BAND, overall_width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PHOSPHATE AND PAINT BAND, material_thickness: 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-281-5428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7390602
NSN: 5340-00-281-5428
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL BAND
overall_width0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPHOSPHATE AND PAINT BAND
material_thickness0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
NSN5340-00-281-5428
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7390602 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PHOSPHATE AND PAINT BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS
DIAMETER0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
SURFACE TREATMENTPHOSPHATE AND PAINT BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
MATERIALSTEEL BAND
MATERIALRUBBER SYNTHETIC CUSHION
LOOP INSIDE DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7390602?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7390602?
7390602 is a CLAMP,LOOP.
What is the NSN for 7390602?
7390602 is cataloged in the U.S. Government catalog under NSN 5340-00-281-5428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7390602

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.