PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 738534-3
738534-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, overall_width: 0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL, overall_outside_diameter: 1.8735 INCHES MINIMUM AND 1.8745 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-433-9897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
738534-3
NSN: 3110-00-433-9897
FSC: 3110
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
overall_width0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
alignment_typeRIGID
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
overall_outside_diameter1.8735 INCHES MINIMUM AND 1.8745 INCHES MAXIMUM IN
NSN3110-00-433-9897
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 738534-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 1.8735 INCHES MINIMUM AND 1.8745 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.8735 INCHES MINIMUM AND 1.8745 INCHES MAXIMUM IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
OVERALL WIDTH0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
J-2-4-12Interchangeable
interchangeable cross-reference
interchangeable
T451Interchangeable
interchangeable cross-reference
interchangeable
115657001PC39Interchangeable
interchangeable cross-reference
interchangeable
J-2412L125Interchangeable
interchangeable cross-reference
interchangeable
207016Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 738534-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 738534-3?
738534-3 is a BEARING,ROLLER,NEEDLE.
What parts can replace 738534-3?
There are 5 known substitutes for 738534-3: J-2-4-12, T451, 115657001PC39 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 738534-3?
738534-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-433-9897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 738534-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026