PartsTable
Technical Data Sheet
Download PDF

7384570-74 — LEVER,INTERLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7384570-74: LEVER,INTERLOCK.

The LEVER,INTERLOCK is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_height: 0.874 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN, special_features: HOLE DIAMETER .625/.626 INCHES, MICRO INCHES FINISH:MATERIAL SPEC ASTM-A564 IN, end_item_identification: SSGN TRIDENT CLASS, general_characteristics_item_description: SURFACE FINISH 63 MICRO INCHES, part_name_assigned_by_controlling_agency: SOF ACCESS DOOR ASSEMBLY AND DETAILS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-528-3018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7384570-74
NSN: 5340-01-528-3018
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_height0.874 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
special_featuresHOLE DIAMETER .625/.626 INCHES, MICRO INCHES FINISH:MATERIAL SPEC ASTM-A564 IN
end_item_identificationSSGN TRIDENT CLASS
general_characteristics_item_descriptionSURFACE FINISH 63 MICRO INCHES
part_name_assigned_by_controlling_agencySOF ACCESS DOOR ASSEMBLY AND DETAILS
NSN5340-01-528-3018
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7384570-74 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: SURFACE FINISH 63 MICRO INCHES
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.874 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
GENERAL CHARACTERISTICS ITEM DESCRIPTIONSURFACE FINISH 63 MICRO INCHES
SPECIAL FEATURESHOLE DIAMETER .625/.626 INCHES, MICRO INCHES FINISH:MATERIAL SPEC ASTM-A564 IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSOF ACCESS DOOR ASSEMBLY AND DETAILS
END ITEM IDENTIFICATIONSSGN TRIDENT CLASS
MATERIALSTEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
G547-3302-74Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7384570-74?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7384570-74?
7384570-74 is a LEVER,INTERLOCK.
What parts can replace 7384570-74?
There is 1 known substitute for 7384570-74: G547-3302-74. Substitute compatibility should be verified for your specific system.
What is the NSN for 7384570-74?
7384570-74 is cataloged in the U.S. Government catalog under NSN 5340-01-528-3018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7384570-74