PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 738034
738034 ✓ Verified by PartsTable
Gorenje · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a Gorenje industrial component. Key specifications include material: STEEL COMP 440C BALL, bore_shape: STRAIGHT, bore_diameter: 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.1950 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-097-4976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
738034
NSN: 3110-01-097-4976
FSC: 3110
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 440C BALL
bore_shapeSTRAIGHT
bore_diameter0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.1950 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresSTABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C56.0 TO C64.0 ROCKWELL HARDNESS RINGS AND BALLS
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialLUBRICANT
overall_outside_diameter0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-01-097-4976
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 738034 · Gorenje ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL COMP 410 RETAINER
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI 440C FED STD SINGLE MATERIAL RESPONSE OUTER RING
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL COMP 410 RETAINER
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI 440C FED STD SINGLE MATERIAL RESPONSE OUTER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.7
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
LOAD DIRECTIONRADIAL
SPECIAL FEATURESSTABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C56.0 TO C64.0 ROCKWELL HARDNESS RINGS AND BALLS
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
SR4Interchangeable
interchangeable cross-reference
interchangeable
13211E4863Interchangeable
interchangeable cross-reference
interchangeable
SCD51990251-003Interchangeable
interchangeable cross-reference
interchangeable
48PInterchangeable
interchangeable cross-reference
interchangeable
F1044Interchangeable
interchangeable cross-reference
interchangeable
MIL-I-3158Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 738034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 738034?
738034 is a BEARING,BALL,ANNULAR manufactured by Gorenje.
What parts can replace 738034?
There are 11 known substitutes for 738034: SR4, 13211E4863, SCD51990251-003 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 738034?
738034 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-097-4976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 738034

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026