PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7375333

7375333 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.343 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, overall_width: 0.875 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.093 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5340-00-737-5333, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7375333
NSN: 5340-00-737-5333
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.343 INCHES NOMINAL IN
materialSTEEL COMP 1010 BAND
overall_width0.875 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.093 INCHES NOMINAL IN
loop_inside_diameter0.890 INCHES NOMINAL IN
material_document_and_classificationASTM A108 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.984 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.609 INCHES NOMINAL IN
NSN5340-00-737-5333
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7375333 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.609 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.890 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.984 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.343 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.609 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.890 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.984 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER0.343 INCHES NOMINAL IN
OVERALL WIDTH0.875 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.093 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10-0744Upgraded SuccessorGOVERNMENT REGISTRY
successor cross-reference
successor
A837InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ABW998007InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
14145InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
680-237InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2002InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7375333?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7375333?
7375333 is a CLAMP,LOOP.
What parts can replace 7375333?
There are 18 known substitutes for 7375333: 10-0744, A837, ABW998007 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7375333?
7375333 is cataloged in the Federal Logistics Information System under NSN 5340-00-737-5333. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7375333

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026