PartsTable
Technical Data Sheet
Download PDF

7375081 — SPECIAL PURPOSE ELE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7375081: SPECIAL PURPOSE ELE.

The SPECIAL PURPOSE ELE is a the manufacturer industrial component. Key specifications include height: 1.221 INCHES MINIMUM AND 1.259 INCHES MAXIMUM IN, material: RUBBER SYNTHETIC OVERALL, hole_depth: 0.546 INCHES NOMINAL IN, hole_diameter: 0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, inside_diameter: 1.611 INCHES MINIMUM AND 1.639 INCHES MAXIMUM IN, overall_diameter: 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-737-5081, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7375081
NSN: 5340-00-737-5081
NIINs: 007375081, 014644261
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height1.221 INCHES MINIMUM AND 1.259 INCHES MAXIMUM IN
materialRUBBER SYNTHETIC OVERALL
hole_depth0.546 INCHES NOMINAL IN
hole_diameter0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
inside_diameter1.611 INCHES MINIMUM AND 1.639 INCHES MAXIMUM IN
overall_diameter2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
style_designatorFLAT
NSN5340-00-737-5081
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7375081 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
•
HOLE DEPTH: 0.546 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT
•
INSIDE DIAMETER: 1.611 INCHES MINIMUM AND 1.639 INCHES MAXIMUM IN
•
HEIGHT: 1.221 INCHES MINIMUM AND 1.259 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
HOLE DEPTH0.546 INCHES NOMINAL IN
STYLE DESIGNATORFLAT
INSIDE DIAMETER1.611 INCHES MINIMUM AND 1.639 INCHES MAXIMUM IN
HEIGHT1.221 INCHES MINIMUM AND 1.259 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 7375081?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7375081?
7375081 is a SPECIAL PURPOSE ELE.
What is the NSN for 7375081?
7375081 is cataloged in the U.S. Government catalog under NSN 5340-00-737-5081. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7375081