PartsTable
Technical Data Sheet
Download PDF

7374594 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7374594: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.906 INCHES NOMINAL IN, aperture_width: 2.031 INCHES NOMINAL IN, overall_length: 3.094 INCHES NOMINAL IN, aperture_length: 2.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-737-4594, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7374594
NSN: 5330-00-737-4594
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.906 INCHES NOMINAL IN
aperture_width2.031 INCHES NOMINAL IN
overall_length3.094 INCHES NOMINAL IN
aperture_length2.312 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,+1141-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-737-4594
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7374594 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1141-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 2.031 INCHES NOMINAL IN
•
APERTURE LENGTH: 2.312 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+1141-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH3.094 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.906 INCHES NOMINAL IN
APERTURE WIDTH2.031 INCHES NOMINAL IN
APERTURE LENGTH2.312 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
6763959Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7374594?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7374594?
7374594 is a GASKET.
What parts can replace 7374594?
There is 1 known substitute for 7374594: 6763959. Substitute compatibility should be verified for your specific system.
What is the NSN for 7374594?
7374594 is cataloged in the U.S. Government catalog under NSN 5330-00-737-4594. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7374594