PartsTable
Technical Data Sheet
Download PDF

7372833 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7372833: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.328 INCHES NOMINAL IN, material: STEEL COMP 1012 BAND, overall_width: 0.625 INCHES NOMINAL IN, style_designator: SINGLE LOOP OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.036 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-737-2833, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7372833
NSN: 5340-00-737-2833
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.328 INCHES NOMINAL IN
materialSTEEL COMP 1012 BAND
overall_width0.625 INCHES NOMINAL IN
style_designatorSINGLE LOOP OFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.036 INCHES NOMINAL IN
loop_inside_diameter0.313 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.322 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.156 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.281 INCHES NOMINAL IN
NSN5340-00-737-2833
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7372833 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.281 INCHES NOMINAL IN
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.328 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.036 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.322 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.281 INCHES NOMINAL IN
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.156 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER0.328 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.036 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.322 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL COMP 1012 BAND
SUBSTITUTES & CROSS-REFERENCES 1
GPW2244Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7372833?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7372833?
7372833 is a CLAMP,LOOP.
What parts can replace 7372833?
There is 1 known substitute for 7372833: GPW2244. Substitute compatibility should be verified for your specific system.
What is the NSN for 7372833?
7372833 is cataloged in the U.S. Government catalog under NSN 5340-00-737-2833. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7372833

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.