PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7372516
7372516 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET SET is a the manufacturer industrial component. Key specifications include document_type: ENGINEERING DRAWING, end_item_name: CARBURETOR,FLOAT, document_source: 19207, end_item_source: 19207, document_identification: DWG NO. 7372516, end_item_identification: 2910-737-2509.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-2516, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7372516
NSN: 5330-00-737-2516
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
document_typeENGINEERING DRAWING
end_item_nameCARBURETOR,FLOAT
document_source19207
end_item_source19207
component_quantity5
document_identificationDWG NO. 7372516
end_item_identification2910-737-2509
component_document_originGOVERNMENT
NSN5330-00-737-2516
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7372516 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DOCUMENT IDENTIFICATION: DWG NO. 7372516
•
END ITEM NAME: CARBURETOR,FLOAT
•
COMPONENT DOCUMENT ORIGIN: GOVERNMENT
•
END ITEM SOURCE: 19207
•
COMPONENT QUANTITY: 5
•
DOCUMENT TYPE: ENGINEERING DRAWING
•
DOCUMENT SOURCE: 19207
TECHNICAL CHARACTERISTICS (FLIS)
DOCUMENT IDENTIFICATIONDWG NO. 7372516
END ITEM NAMECARBURETOR,FLOAT
COMPONENT DOCUMENT ORIGINGOVERNMENT
END ITEM IDENTIFICATION2910-737-2509
END ITEM SOURCE19207
COMPONENT QUANTITY5
DOCUMENT TYPEENGINEERING DRAWING
DOCUMENT SOURCE19207
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
54016Interchangeable
interchangeable cross-reference
interchangeable
188Interchangeable
interchangeable cross-reference
interchangeable
3033-12CInterchangeable
interchangeable cross-reference
interchangeable
C500000035Interchangeable
interchangeable cross-reference
interchangeable
D4-4BInterchangeable
interchangeable cross-reference
interchangeable
32T556Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7372516?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7372516?
7372516 is a GASKET SET.
What parts can replace 7372516?
There are 20 known substitutes for 7372516: 54016, 188, 3033-12C and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7372516?
7372516 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-2516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7372516

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026