PartsTable
Technical Data Sheet
Download PDF

7372514 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7372514: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 3.906 INCHES NOMINAL IN, overall_length: 3.438 INCHES NOMINAL IN, cross-sectional_thickness: 0.035 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, material_document_and_classification: MIL-G-12803 +3313-B MIL SPEC ALL MATERIAL RESPONSES AND MIL-G-12803,+3313-C MIL SPEC ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-495-1697, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7372514
NSN: 5330-00-495-1697
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
overall_width3.906 INCHES NOMINAL IN
overall_length3.438 INCHES NOMINAL IN
cross-sectional_thickness0.035 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803 +3313-B MIL SPEC ALL MATERIAL RESPONSES AND MIL-G-12803,+3313-C MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-495-1697
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7372514 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.035 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 +3313-B MIL SPEC ALL MATERIAL RESPONSES AND MIL-G-12803,+3313-C MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.035 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 +3313-B MIL SPEC ALL MATERIAL RESPONSES AND MIL-G-12803,+3313-C MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH3.438 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.906 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
116896Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
121-138Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7372514?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7372514?
7372514 is a GASKET.
What parts can replace 7372514?
There are 2 known substitutes for 7372514: 116896, 121-138. Substitute compatibility should be verified for your specific system.
What is the NSN for 7372514?
7372514 is cataloged in the U.S. Government catalog under NSN 5330-00-495-1697. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7372514

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.