PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7371364
7371364 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include material: WOOL COMP 12R3 OVERALL, outside_diameter: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, cross-sectional_height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, material_document_and_classification: C-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-1364, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7371364
NSN: 5330-00-737-1364
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialWOOL COMP 12R3 OVERALL
outside_diameter0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
cross-sectional_height0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
material_document_and_classificationC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-737-1364
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7371364 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: WOOL COMP 12R3 OVERALL
•
OUTSIDE DIAMETER: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: C-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALWOOL COMP 12R3 OVERALL
OUTSIDE DIAMETER0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
MIL-DTL-14652BInterchangeable
interchangeable cross-reference
interchangeable
A-1-76Interchangeable
interchangeable cross-reference
interchangeable
MIL-I-14652Interchangeable
interchangeable cross-reference
interchangeable
215-01187-18Interchangeable
interchangeable cross-reference
interchangeable
A164Interchangeable
interchangeable cross-reference
interchangeable
7-1934Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7371364?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7371364?
7371364 is a FELT,MECHANICAL,PREFORMED.
What parts can replace 7371364?
There are 11 known substitutes for 7371364: MIL-DTL-14652B, A-1-76, MIL-I-14652 and 8 more. Substitute compatibility should be verified for your specific system.
Is 7371364 still available?
7371364 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7371364

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026